Type: po-upl-s
The highly efficient oddesse permanent magnet synchronous propeller pumps are single-stage centrifugal pumps with an open semi-axial impeller. They are used to pump clean and slightly polluted water.
Operating data
| Delivery rate Delivery head Performance Voltage Type of current Frequency Degree of protection Ambient temperature |
… 1.150 m³/h … 35 m … 55 kW … 460 V 3~ … 60 Hz IP68 … 50 ° C |
Type: po-upl
The highly efficient oddesse permanent magnet synchronous propeller pumps are single-stage centrifugal pumps with an open semi-axial impeller. They are used to pump clean and slightly polluted water.
Operating data
| Delivery rate Delivery head Performance Voltage Type of current Frequency Degree of protection Ambient temperature |
… 1.150 m³/h … 35 m … 55 kW … 460 V 3~ … 60 Hz IP68 … 50 ° C |
Applications
- irrigation and drainage of agricultural land
- water level regulation (pump station and polder pumps)
- circulation of water in sewage treatment plants
- oxygen enrichment of breeding water at fisheries
- trimming of ships, ferries and tankers
- emptying or flooding of floating docks and tanks
- clean or slightly dirty water with a solids content of up to 50 mg/l
- fresh water, sea water and brackish water
- pumped medium temperatures up to 50 °C
- installation in vertical or horizontal position
- operation as in-line pump or submerged
Executions
- single-stage centrifugal pumps with surface-treated, open special bronze impeller
- rewindable three-phase motor, rotor equipped with permanent magnets
- lubrication of the radial bearings by motor filling
- motor filling consists of glycol-water mixture or pure water filling
- axial thrust is absorbed by a double-sided axial thrust bearing with self-adjusting tilting pads
- diaphragm ensures pressure compensation between motor and environment
- Operation of the po-upl-s only possible with frequency converter
- tandem and back-to-back arrangement possible
- high-quality materials for application in service, industrial and sea water
Advantages
- high energy efficiency and increased hydraulic efficiency
- low energy consumption and significant reduction of energy costs
- wear-resistant parts and easy maintenance guarantee a long service life
- excellent cooling thanks to water-filled motor and pumped medium flowing around the motor
- easy replacement of spare parts
- stator with rewindable and waterproof winding
- environmentally friendly – fully recyclable
- comprehensive service network
Materials
| Component | Execution | |
| GG25 |
Bronze |
|
| Impeller | Bronze | |
| Casing | Grey cast iron GG25 * | Bronze * |
| Shaft | Stainless steel / 1.4462 | |
| Radial bearing | Chrome steel / Bronze | |
| Thrust bearing | Steel / coal | |
| Shaft sealing | Mechanical seal SiC / SiC | |
| Fasteners | Stainless steel / 1.4301 | Stainless steel / 1.4539 |
* CERAM coating possible – offers protection against corrosion and minimises life cycle costs
Applications
- irrigation and drainage of agricultural land
- water level regulation (pump station and polder pumps)
- circulation of water in sewage treatment plants
- oxygen enrichment of breeding water at fisheries
- trimming of ships, ferries and tankers
- emptying or flooding of floating docks and tanks
- clean or slightly dirty water with a solids content of up to 50 mg/l
- fresh water, sea water and brackish water
- pumped medium temperatures up to 50 °C
- installation in vertical or horizontal position
- operation as in-line pump or submerged
Executions
- single-stage centrifugal pumps with surface-treated, open special bronze impeller
- rewindable three-phase motor, rotor equipped with permanent magnets
- lubrication of the radial bearings by motor filling
- motor filling consists of glycol-water mixture or pure water filling
- axial thrust is absorbed by a double-sided axial thrust bearing with self-adjusting tilting pads
- diaphragm ensures pressure compensation between motor and environment
- Operation of the po-upl-s only possible with frequency converter
- tandem and back-to-back arrangement possible
- high-quality materials for application in service, industrial and sea water
Advantages
- high energy efficiency and increased hydraulic efficiency
- low energy consumption and significant reduction of energy costs
- wear-resistant parts and easy maintenance guarantee a long service life
- excellent cooling thanks to water-filled motor and pumped medium flowing around the motor
- easy replacement of spare parts
- stator with rewindable and waterproof winding
- environmentally friendly – fully recyclable
- comprehensive service network
Use in Recirculating Aquaculture Systems
In Norway and Canada, the highly efficient po-upl-s propeller pumps are used in recirculating aquaculture systems (RAS) for aeration and oxygenation of aquacultures.
